Sunward SWE130W

Used Sunward SWE130W wheeled excavator — reference specifications, condition points and export notes for this model.

The Sunward SWE130W is a wheeled digging excavator weighing 12.6 T with a 0.52m3 bucket. A Cummins B3.9 engine rated 82kw/2200rpm drives it, and maximum dig depth is 4510mm. This class suits mid-size trenching, utility and general construction excavation where travel between sites matters.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Sunward SWE130W
Operating weight	12.6 T
Bucket capacity	0.52m3
Rated power	82kw / 2200rpm
Engine	Cummins B3.9
Max dig depth	4510mm

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Sunward SWE130W

A wheeled digging excavator of this class weighs 12.6 t and carries a 0.52 m3 bucket, powered by a Cummins B3.9 engine rated at 82 kW at 2200 rpm. It fits utility contracts, roadworks and general construction where the machine must travel between sites under its own power. The maximum dig depth of 4510 mm covers many trenching and foundation tasks. This size is often chosen for municipal work and rental fleets because it combines reasonable digging performance with road mobility, reducing the need for a transporter on short moves. On site, the wheeled undercarriage changes how the machine behaves compared with a tracked unit.

Travel speed is higher and road travel is possible, but stability on soft ground and slopes depends on tyre condition, axle locks and correct use of stabilisers. Buyers should consider tyre type and wear, steering play, the travel lock and the attachments they intend to use. A 12.6 t wheeled excavator can lift and swing loads, but capacity reduces as reach increases, so check the load chart for the planned work. Before paying, inspect the engine for leaks, smoke and consistent power from the Cummins B3.9. Listen to the hydraulic pump and check hoses, cylinders and the swing motor for leaks or unusual noise.

Pins and bushes in the boom, arm and bucket linkage reveal wear through play and ovality. Wheel hubs, brakes and the steering axle need close attention on any wheeled machine. Look for cracks or previous repairs in the main frame and articulation. These points matter more than cosmetic condition when judging a used unit. Transport usually involves a container if the machine fits after folding the boom, or a flat rack, RoRo or breakbulk vessel if not.

The real dimensions, especially height and width, decide the method, along with the destination port's handling capability and shipping schedules. Wheeled excavators are often driven onto RoRo vessels, while flat racks are common where container handling is limited. Buyers should ask the supplier for lifting points and securing details before booking, since the loading method affects cost, risk and preparation work.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Sunward SWE130W available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Sunward SWE130W cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Sunward SWE130W shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.