Nanqiao NQ100W-8

Used Nanqiao NQ100W-8 wheeled excavator — reference specifications, condition points and export notes for this model.

The Nanqiao NQ100W-8 is a small hydraulic wheeled digging excavator for utility and site work. It runs a 62 kW 4DK engine, takes a 0.2-0.4 m3 bucket and reaches a 4075 mm maximum dig depth, suiting trenching and general digging tasks.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Nanqiao NQ100W-8
Bucket capacity	0.2-0.4m³
Rated power	62kW
Engine	4DK
Max dig depth	4075mm

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Nanqiao NQ100W-8

The Nanqiao NQ100W-8 is a wheeled digging excavator with a bucket capacity of 0.2 to 0.4 cubic metres and rated power of 62 kW from a 4DK engine. This class suits utility work, trenching, drainage and general site handling where a compact tracked unit would be slow to reposition. Maximum dig depth is 4075 mm, so plan for shallow to medium excavation rather than deep bulk digging. The combination of a modest bucket and moderate power keeps cycle loads low, which suits contractors moving between scattered jobs on paved roads. On site the wheeled undercarriage gives road speed and independent mobility that a tracked machine cannot match, but the buyer should weigh stability against that convenience.

A machine of this size on four tyres can feel light when the boom is extended to full reach, so check the travel lock and outrigger arrangement if fitted. Tyre condition, tread pattern and pressure affect traction and flotation on soft ground. Steering geometry and turning circle matter in tight yards. Confirm which attachments the hydraulic circuit supports before committing, since hammer or grab work changes the duty cycle and cooling demand. Inspection should start with the engine, looking for smoke, oil seepage and coolant condition, then move to the hydraulic system for pump noise, hose condition and cylinder rod scoring.

Pins and bushes at the boom, dipper and bucket show wear quickly on this class, so check for play. Wheel hubs and final drives deserve attention for leaks and bearing noise. Brakes and the parking lock are safety items. Inspect the frame and swing area for cracks, and confirm the hour meter and service records are consistent with the machine's condition. Shipping this size normally uses a container where dimensions allow, otherwise a flat rack or RoRo, with breakbulk as a fallback for awkward routings.

The real dimensions of the unit, particularly height with the boom folded and width over the tyres, decide whether a container works. Destination port facilities and the sailing schedule shape the choice between RoRo and flat rack. The buyer should request measured dimensions and a loading plan before booking, and confirm lashing points and any dismantling needed for transport.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Nanqiao NQ100W-8 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Nanqiao NQ100W-8 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Nanqiao NQ100W-8 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.