Jonyang JYL635-G

Used Jonyang JYL635-G wheeled excavator — reference specifications, condition points and export notes for this model.

The Jonyang JYL635-G is a tyre-mounted material handler with grab/grapple equipment, operating weight 35 and a 0.6 bucket. A QSB6.7 engine rated at 179 powers it. This class suits scrap and material handling work with a grab attachment.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Jonyang JYL635-G
Operating weight	35
Bucket capacity	0..6
Rated power	179
Engine	QSB6.7

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Jonyang JYL635-G

Material handlers with a grab or grapple are used for loading, sorting and handling loose material rather than digging. The JYL635-G has an operating weight of 35 tonnes, a rated power of 179 kilowatts from its QSB6.7 engine, and a bucket capacity figure listed as 0.6. This size of machine suits scrap yards, ports, waste handling and bulk material operations where reach and lifting capacity matter. The wheeled undercarriage allows travel between stockpiles and work areas, and the grab attachment is intended for handling rather than excavation. The wheeled undercarriage on a 35-tonne machine gives mobility but requires attention to stability, especially when the equipment is extended with a loaded grab.

Tyre condition and type affect traction and flotation, and steering and travel lock systems are important for safe travel and steady handling. Buyers should weigh the attachments planned, since grab size and material density change loads on the linkage and hydraulics. Ground bearing pressure and axle loading should be checked against the surfaces the machine will use, and the working area around stockpiles affects how the machine is positioned. Before paying, check the engine for smoke, leaks and starting behaviour, and the hydraulic system for pump noise, valve response and cylinder condition. Pins and bushes in the boom, arm and grab linkage wear with use and affect control, so check for play.

Wheel hubs, bearings, brakes and steering components need attention on a wheeled machine. Examine the structure for cracks or repairs around the boom foot and frame. A demonstration under load with the grab, together with service records, gives a clearer picture of condition than a static inspection. Shipping a 35-tonne wheeled material handler is normally by flat rack, RoRo or breakbulk, with container shipment unlikely given the size. The unit's overall length, width and height, together with the facilities at the destination port, decide the method.

Buyers should confirm dimensions, whether the machine can be reduced for transport, and the lashing and lifting points. Port handling capability and sailing schedules influence the final arrangement. The grab attachment may need separate packing or removal for transport, and this should be confirmed before booking.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Jonyang JYL635-G available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Jonyang JYL635-G cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Jonyang JYL635-G shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.