Hyundai R60WVS PRO

Used Hyundai R60WVS PRO wheeled excavator — reference specifications, condition points and export notes for this model.

The Hyundai R60WVS PRO is a wheeled digging excavator weighing 5,750kg with 42.5kW / 2400 rpm rated power. Travel speed is 31km/h and maximum dig depth 3,500mm, suiting light trenching and utility work.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Hyundai R60WVS PRO
Operating weight	5,750kg
Rated power	42.5kW / 2400 rpm
Engine	42.5kW / 2400 rpm
Travel speed	31km/h
Max dig depth	3,500mm

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Hyundai R60WVS PRO

Hyundai R60WVS PRO is an under-8 t wheeled excavator with an operating weight of 5750 kg, rated power of 42.5 kW at 2400 rpm, and a maximum dig depth of 3500 mm. It suits utility work, landscaping, trenching and small construction tasks where a compact, mobile machine is needed. Travel speed of 31 km/h allows short road transfers. The lower weight helps with transport and access to confined sites. This model is aimed at contractors needing a simple, reliable machine for everyday digging. The wheeled undercarriage of the R60WVS PRO behaves like a small truck on site, with front steering and rear drive.

It can travel on paved roads at up to 31 km/h for short distances. On soft or uneven ground, traction is limited, so use stabilisers when digging. The compact size and low weight give good manoeuvrability in tight areas. Keep tyre pressures correct and avoid sharp turns on soft surfaces to prevent rutting and tyre damage. Inspect the R60WVS PRO before purchase by checking tyre condition, wheel bearings, steering and brakes. Look at boom and arm pins for wear, hydraulic hoses for cracks, and the swing bearing for play.

Start the engine cold and check for smoke or unusual noise. Operate all hydraulic functions through full cycles and check for leaks at the pump, valves and cylinders. Test travel in both directions and confirm the dig depth reaches 3500 mm. Verify the serial plate and documents. Shipping the R60WVS PRO is straightforward by flatbed truck or in a container after removing the boom if required. Its under-8 t weight class keeps transport simple.

Secure with chains at the tie-down points, lower the boom, and set the parking brake. For container loading, follow the carrier's lashing instructions and block the wheels. Confirm overall dimensions and weight with the seller before booking freight.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Hyundai R60WVS PRO available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Hyundai R60WVS PRO cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Hyundai R60WVS PRO shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.