Hyundai R210WVS

Used Hyundai R210WVS wheeled excavator — reference specifications, condition points and export notes for this model.

The Hyundai R210WVS is a wheeled digging excavator weighing 20,800kg with 129 kw (173HP) / 2,200 rpm rated power. Travel speed is 9.3 / 37.9 km/h high and low, and maximum dig depth ranges 5,480 to 6,380mm, suiting larger excavation work.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Hyundai R210WVS
Operating weight	20,800kg
Rated power	129 kw (173HP) / 2,200 rpm
Engine	129 kw (173HP) / 2,200 rpm
Travel speed	9.3 / 37.9 km/h（高/低）
Max dig depth	5,480 / 5,880 / 6,380 mm

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Hyundai R210WVS

The Hyundai R210WVS is intended for heavy construction, road work and large-scale excavation where a 20 tonne and over wheeled excavator is required. Its 20800 kg operating weight and 129 kW at 2200 rpm rating place it in the large wheeled excavator class. Maximum dig depths of 5480, 5880 and 6380 mm across configurations support deep trenches and bulk earthmoving. Travel speeds of 9.3 and 37.9 km/h allow site movement and road transfer, which suits contractors working across multiple locations. At 20800 kg, transport requires a heavy low-bed trailer and careful route planning, and the wheeled undercarriage gives stability on firm, level ground.

The deep dig depths up to 6380 mm demand level footing and attention to the centre of gravity at full reach, with spoil and lifting planned around the reach envelope. The 129 kW rating supports the hydraulic demand of deep digging. The two travel speed ranges, 9.3 and 37.9 km/h, support road transfer, but check ground bearing capacity before working near excavations. Inspection should cover the wheeled undercarriage, steering, brakes and tyre condition, then the boom, dipper and bucket linkage for cracks or excessive play. Check the 129 kW engine for leaks, belt wear and cooling performance, and test the hydraulic system for pressure and drift.

Verify the dig depths of 5480, 5880 and 6380 mm in a measured trench according to configuration, and test both travel speed ranges. Inspect the operator station, controls and safety decals, and confirm the operating weight matches the 20800 kg specification. Shipping preparation includes cleaning, securing the boom and bucket, and confirming tie-down and lifting points on the chassis. Protect the engine and hydraulic components from salt air, and drain or protect fluids for the voyage. Lock the wheeled undercarriage for transport, and provide dimensions and weight to the carrier.

Label controls for the receiving operator and include a basic guide, and check the machine for loose parts or damaged guards before loading. Confirm travel speed controls are set for transport.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Hyundai R210WVS available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Hyundai R210WVS cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Hyundai R210WVS shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.