Xinanyuan AWL4830-3

Used Xinanyuan AWL4830-3 wheeled excavator — reference specifications, condition points and export notes for this model.

The Xinanyuan AWL4830-3 is a wheeled digging excavator in the small wheeled class. A wheeled undercarriage suits work that involves moving between sites on roads or hard surfaces, and the machine is intended for general digging and loading duties. Bucket capacity is listed in m3 and rated power in Kw/hp.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Xinanyuan AWL4830-3
Specifications to be confirmed per unit.

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Xinanyuan AWL4830-3

This class of wheeled digging excavator is a compact, mobile machine for utility work, road maintenance, and small site excavation. On the AWL4830-3, the rated power is given in kW/hp, and bucket capacity is listed in m , though the catalogue does not state the figures. These machines typically weigh around 4.8 tonnes and carry a bucket of roughly 0.2 m , but buyers should confirm these values. The size suits trenching, landscaping, and loading tasks where travel between sites is frequent and a tracked machine would be slower. A wheeled undercarriage gives this size good road speed and mobility, but stability on uneven ground is lower than a tracked equivalent.

Buyers should weigh tyre condition and type, steering mode, and the presence of a travel lock or oscillation lock for safe digging. The ability to switch attachments quickly adds versatility, but each attachment changes weight and balance. Consider ground conditions and whether four-wheel or two-wheel steering is needed. Travel speed and gradeability matter for moving between jobs without a transporter. Before paying, inspect the engine for leaks, smoke, and starting ease, and check the hydraulic system for response, noise, and cylinder condition.

Pins and bushes on the boom, arm, and bucket should be checked for play and grease condition. Wheel hubs need inspection for bearing noise and seal leaks, and brakes should be tested for stopping power. Structural checks include boom and arm welds, chassis cracks, and the condition of the swing bearing. Service records and a cold-start demonstration are useful. Shipping this size normally uses a container, flat rack, or RoRo, depending on dimensions and destination port.

The unit's real length, width, and height decide whether it fits in a standard container or needs a flat rack or breakbulk vessel. Port facilities and shipping line options also influence the method. Buyers should request exact dimensions and weight, and confirm with the freight forwarder whether the machine can be loaded without dismantling. Proper securing points and lashing arrangements are part of the shipping plan.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Xinanyuan AWL4830-3 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Xinanyuan AWL4830-3 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Xinanyuan AWL4830-3 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.