Liebherr A 924 C Plus Litronic

Used Liebherr A 924 C Plus Litronic wheeled excavator — reference specifications, condition points and export notes for this model.

The Liebherr A 924 C Plus Litronic is a wheeled digging excavator with an operating weight of 26,600 - 27,300 kg and a bucket capacity of 0.75 - 1.55 m3. Rated power is 129 kW/175 HP (ISO 9249). This class suits general excavation and site work.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Liebherr A 924 C Plus Litronic
Operating weight	26,600 - 27,300 kg
Bucket capacity	0.75 - 1.55 m³
Rated power	129 kW/175 HP (ISO 9249)
Engine	129 kW/175 HP (ISO 9249)

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Liebherr A 924 C Plus Litronic

The Liebherr A 924 C Plus Litronic is suited to earthmoving, drainage and road works where a wheeled machine must move between tasks. It is in the 20 t and over class, with a bucket capacity range of 0.75 to 1.55 m3 and a rated power of 129 kW/175 HP (ISO 9249). The Litronic control system is part of the machine's identity. This brief covers the class and its practical implications for transport, inspection and shipping, using only the catalogue figures and general engineering knowledge. The 26,600 to 27,300 kg operating weight of the A 924 C Plus Litronic is the range to use for transport planning, not the model name.

At this weight the machine needs careful route and carrier checks. Stability on site benefits from the mass, but the wheeled undercarriage still requires firm, level ground for lifting. The 0.75 to 1.55 m3 bucket range and 129 kW/175 HP rating support varied digging duties. Confirm axle loads and tyre ratings before road travel. Inspection of a used A 924 C Plus Litronic starts with the wheeled undercarriage: check hub play, tyre condition and steering components.

Run the hydraulic system through a full cycle at 129 kW/175 HP and listen for unusual noise. Inspect the boom, dipper and bucket linkage for cracks or repairs. Check the engine for leaks, smoke and vibration. Confirm the bucket within the 0.75 to 1.55 m3 range is sound and matches the coupler. Ask for maintenance records where they exist.

Shipping the A 924 C Plus Litronic requires lowering the boom, securing the axles and removing loose attachments. The 26,600 to 27,300 kg operating weight and wheeled stance determine the loading method, so confirm dimensions and lifting points with the carrier first. Protect hydraulic hoses and cylinder rods during transit. Use certified lifting points and recheck tie-downs after the first part of the journey. The 0.75 to 1.55 m3 bucket range is a working figure, not a shipping dimension.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Liebherr A 924 C Plus Litronic available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Liebherr A 924 C Plus Litronic cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Liebherr A 924 C Plus Litronic shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.