Liebherr A 924 C HD

Used Liebherr A 924 C HD wheeled excavator — reference specifications, condition points and export notes for this model.

The Liebherr A 924 C HD is a wheeled log loader with an operating weight of 29,000 kg and a bucket capacity of 1.70 m2. Rated power is 129 kW/175 HP (ISO 9249). This class suits log loading and timber handling work.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Liebherr A 924 C HD
Operating weight	29,000 kg
Bucket capacity	1.70 m²
Rated power	129 kW/175 HP (ISO 9249)
Engine	129 kW/175 HP (ISO 9249)

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Liebherr A 924 C HD

The Liebherr A 924 C HD is built for heavier earthmoving, road construction and site preparation where output matters. It sits in the 20 t and over class, with a 1.70 m2 bucket capacity and a rated power of 129 kW/175 HP (ISO 9249). The HD designation points to a heavier-duty build for demanding work. This brief covers the class and its practical implications for transport, inspection and shipping. It uses only the catalogue figures and general engineering knowledge. The 29,000 kg operating weight of the A 924 C HD is the key figure for transport planning; it places the machine in a category that needs careful route and carrier checks.

Stability on site benefits from the mass, but the wheeled undercarriage still needs firm, level ground for lifting. The 1.70 m2 bucket capacity and 129 kW/175 HP rating support sustained digging. Confirm axle loads and tyre ratings before road travel. Do not infer transport limits from the model name alone. Inspection of a used A 924 C HD should begin with the wheeled undercarriage: check hub play, tyre condition and steering components for wear. Run the hydraulic system through a full cycle at 129 kW/175 HP and listen for unusual noise.

Inspect the boom, dipper and bucket linkage for cracks or previous repairs. Check the engine for leaks, smoke and vibration. Confirm the 1.70 m2 bucket is sound and matches the coupler. Ask for maintenance records where they exist. Shipping the A 924 C HD requires lowering the boom, securing the axles and removing loose attachments. The 29,000 kg operating weight and wheeled stance determine the loading method, so confirm dimensions and lifting points with the carrier first.

Protect hydraulic hoses and cylinder rods during transit. Use certified lifting points and recheck tie-downs after the first part of the journey. The 1.70 m2 bucket and 129 kW/175 HP rating are working figures, not shipping dimensions.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Liebherr A 924 C HD available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Liebherr A 924 C HD cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Liebherr A 924 C HD shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.