Komatsu PW198-11

Used Komatsu PW198-11 wheeled excavator — reference specifications, condition points and export notes for this model.

The Komatsu PW198-11 is a wheeled digging excavator with an operating weight of 17.3 to 19.8 t, a 1.13 m3 bucket and 129 kW / 173 HP rated power. It suits trenching, utility and general earthmoving work, with a maximum dig depth of 5.7 m.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Komatsu PW198-11
Operating weight	17.3–19.8 t
Bucket capacity	1.13 m³
Rated power	129 kW / 173 HP
Max dig depth	5.7 m

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Komatsu PW198-11

The Komatsu PW198-11 is intended for road construction, utility installation and general earthmoving where a wheeled excavator offers travel flexibility. It falls in the 17.3 to 19.8 tonne class and uses a 1.13 m3 bucket. Rated power is 129 kW / 173 HP. The maximum dig depth of 5.7 m is slightly less than some in this class, so it suits shallower trenching and loading work. Contractors who need mobility between sites will find this class appropriate. With an operating weight of 17.3 to 19.8 tonnes, transport requires a heavy low-bed trailer and likely permits.

Check axle loads and route restrictions. On site, the weight provides a stable base for digging, but the wheeled design means the centre of gravity is higher than a tracked machine. Use outriggers where fitted and keep the bucket close when lifting. Tyre pressure and ground bearing capacity affect stability, especially on soft or uneven surfaces. Inspection should focus on the wheeled undercarriage: check for play in the hubs, condition of the tyres and leaks from the axle seals. Look over the boom and dipper for cracks or repairs.

Test the hydraulic system through full cycles for smoothness and leaks. Start the engine from cold and check for smoke or unusual noise. Inspect the cab structure, seat and controls, and confirm that safety devices are present and functional. For shipping, the 17.3 to 19.8 tonne weight and overall dimensions dictate the trailer and loading plan. Use a low-bed trailer with adequate rated capacity. Secure with chains and wheel chocks, and protect hydraulic hoses and cylinders.

Confirm lifting points and use certified equipment. Provide the carrier with accurate weight and dimensions for permits. Record the machine's condition before loading and photograph all sides.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Komatsu PW198-11 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Komatsu PW198-11 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Komatsu PW198-11 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.