Jingong (JGM) JGM9085LNZ-8

Used Jingong (JGM) JGM9085LNZ-8 wheeled excavator — reference specifications, condition points and export notes for this model.

This Jingong JGM9085LNZ-8 is a wheeled digging excavator with a sugarcane and wood grab, weighing 7200 kg and rated 48 kW at 2300 rpm. Travel speed reaches 0-30 km/h. It suits yard and field handling of cane and timber alongside general wheeled digging work.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Jingong (JGM) JGM9085LNZ-8
Operating weight	7200
Rated power	48/2300
Travel speed	0～30

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Jingong (JGM) JGM9085LNZ-8

The Jingong JGM9085LNZ-8 suits utility work, road maintenance, and tight-site excavation where a compact wheeled machine can travel between jobs under its own power. Its 7200 kg operating weight places it in the under-8-tonne class, with a rated power of 48 kW at 2300 rpm and a travel speed of 0 to 30 km/h. This class balances reach and lift capacity against narrow access, so plan tasks around light to medium digging and truck loading rather than heavy bulk excavation. The wheeled layout reduces ground disturbance on paved surfaces and supports frequent repositioning.\n\nAt 7200 kg, the JGM9085LNZ-8 is light enough for a standard low-bed trailer without specialist permits in many regions, though local road rules still apply.

The compact footprint improves stability on firm, level ground but demands careful setup on slopes or soft soil; use outriggers or blade contact where fitted. Travel speed up to 30 km/h allows short road transfers, but long runs should use a transporter to limit tyre and driveline wear. Keep transport height and width in mind when planning routes.\n\nInspection should focus on the wheeled undercarriage: check axle seals, hub play, tyre condition, and steering linkage for wear. Test the hydraulic system for smooth operation through full travel, looking for leaks at cylinders and hose junctions.

Verify the engine starts cleanly and reaches rated speed without smoke or hesitation. Inspect the boom and dipper for cracks or repairs, and confirm the swing bearing has no excessive play. Electrical systems, lights, and safety interlocks deserve a functional check.\n\nFor shipping, the JGM9085LNZ-8 can be driven onto a flatbed or rolled into a container depending on configuration; confirm tie-down points and secure the boom and attachment. Protect exposed hydraulic rods and remove loose items.

Document the machine condition before loading and check that transport brackets are fitted where required. Sea freight benefits from desiccant and covering, and the battery should be isolated. Provide the carrier with dimensions and weight so lifting and lashing plans match the actual unit.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Jingong (JGM) JGM9085LNZ-8 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Jingong (JGM) JGM9085LNZ-8 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Jingong (JGM) JGM9085LNZ-8 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.