Jingong (JGM) JGM9075LN-9

Used Jingong (JGM) JGM9075LN-9 wheeled excavator — reference specifications, condition points and export notes for this model.

The Jingong (JGM) JGM9075LN-9 is a wheeled digging excavator with an operating weight of 6800kg and a 0.3m3 bucket. Rated power is 55kW at 2200rpm and maximum dig depth is 3550mm. It suits light-to-medium trenching, utility work and general site excavation.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Jingong (JGM) JGM9075LN-9
Operating weight	6800
Bucket capacity	0.3
Rated power	55/2200
Engine	55/2200
Max dig depth	3550

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Jingong (JGM) JGM9075LN-9

The Jingong JGM9075LN-9 fits utility contracting, road maintenance and small-scale earthmoving where a compact wheeled machine can move between jobs. It is an under 8 t class excavator with a 0.3 bucket capacity and a maximum dig depth of 3550. Rated power is 55/2200, giving a lower engine speed than some siblings in the range. The wheeled layout suits firm, prepared ground rather than soft site conditions. This brief sets out the class and its practical implications. The 6800 operating weight of the JGM9075LN-9 sits at the upper end of the compact class, which affects both transport and stability.

Haulage planning should use the 6800 figure, not the model number. On site, the wheeled undercarriage needs level, firm ground for safe lifting; soft or sloping surfaces reduce the margin. The 0.3 bucket capacity is matched to the weight for moderate output. Check tyre pressures and ballast before lifting tasks. The 55/2200 rating keeps engine speed modest during steady work. Begin inspection of a used JGM9075LN-9 with the wheeled undercarriage: look for hub play, uneven tyre wear and steering slack.

Run the hydraulics through a full cycle at 55/2200 and note any hesitation or noise. Inspect the boom and dipper for cracks, and compare the maximum dig depth of 3550 with bucket wear. Check the engine for leaks, smoke and unusual vibration. Confirm that the 0.3 bucket is sound and fits the quick coupler if one is present. Request service records where available. For shipping the JGM9075LN-9, lower the boom, secure the axles and remove loose attachments before loading.

The 6800 operating weight and wheeled stance determine the loading method, so confirm dimensions with the carrier first. Protect hydraulic hoses and cylinder rods during transit. Use certified lifting points and recheck tie-downs after the first part of the journey. The 0.3 bucket and 3550 dig depth are working figures only. Plan around the 6800 weight rather than the model name.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Jingong (JGM) JGM9075LN-9 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Jingong (JGM) JGM9075LN-9 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Jingong (JGM) JGM9075LN-9 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.