Hunter (Hengte) HTL80-9

Used Hunter (Hengte) HTL80-9 wheeled excavator — reference specifications, condition points and export notes for this model.

The Hunter (Hengte) HTL80-9 is a wheeled digging excavator with a 0.35m3 bucket. Its YTR4108-G64B engine delivers 59kW at 2200rpm and travel speed is 18km/h. It suits light-to-medium trenching, utility work and general site excavation with a compact wheeled undercarriage.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Hunter (Hengte) HTL80-9
Bucket capacity	0.35 (m3)
Rated power	59/2200 (kw/rpm)
Engine	YTR4108-G64B
Travel speed	18 (km/h)

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Hunter (Hengte) HTL80-9

The Hunter HTL80-9 is aimed at general construction and utility excavation, including trenching, drainage and site preparation, where a mid-size wheeled excavator can travel between locations. Its 0.35 cubic metre bucket capacity and 59 kW at 2200 rpm rating from the YTR4108-G64B engine place it in the medium wheeled excavator class. A travel speed of 18 km/h supports short road moves and yard transfers. The machine suits contractors who need more bucket volume than a compact unit while keeping road mobility.

With the mid-size class, transport planning should account for the machine's dimensions and weight on a suitable trailer. The wheeled undercarriage provides stability on firm, level surfaces, and the 18 km/h travel speed is intended for site and short road movement rather than highway travel. At full reach, ground bearing capacity matters, so prepare level working platforms. The larger bucket capacity relative to compact units means more material per cycle, which affects cycle planning and spoil handling.

Inspection should cover the wheeled undercarriage, steering, brakes and tyre condition, then the boom, dipper and bucket linkage for cracks or excessive play. Check the YTR4108-G64B engine for leaks, belt wear and cooling performance, and test the hydraulic system for pressure and drift. Verify travel speed through the 18 km/h range and listen for transmission or axle noise. Inspect the operator station, controls and safety decals, and confirm the bucket capacity marking matches the 0.35 cubic metre specification.

Shipping preparation includes cleaning, securing the boom and bucket, and confirming tie-down and lifting points on the chassis. Protect the YTR4108-G64B engine and hydraulic components from salt air, and drain or protect fluids as required for the voyage. Lock the wheeled undercarriage for transport and provide dimensions and weight to the carrier. Label controls and provide a basic operating guide for the receiving operator, and check that the machine is free of loose parts before loading.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Hunter (Hengte) HTL80-9 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Hunter (Hengte) HTL80-9 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Hunter (Hengte) HTL80-9 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.