Hunter (Hengte) HTL70

Used Hunter (Hengte) HTL70 wheeled excavator — reference specifications, condition points and export notes for this model.

The Hunter (Hengte) HTL70 is a wheeled digging excavator with a 0.26m3 bucket. Its YC4FA65 engine delivers 50kW at 2200rpm, travel speed is 19-21km/h and maximum dig depth is 3500mm. It suits light trenching, utility work and general small-site excavation.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Hunter (Hengte) HTL70
Bucket capacity	0.26
Rated power	50/2200
Engine	YC4FA65
Travel speed	19-21
Max dig depth	3500

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Hunter (Hengte) HTL70

The Hunter HTL70 is suited to utility and light construction work such as trenching, footing excavation and site cleanup, where a compact wheeled excavator can move between tasks without a transporter. Its 0.26 cubic metre bucket capacity and 50 kW at 2200 rpm rating from the YC4FA65 engine place it in the small wheeled excavator class. Travel speed of 19 to 21 km/h supports short road transfers between nearby jobs. The 3500 mm maximum dig depth covers shallow service trenches and general earthmoving within this class.

Size and weight follow from the compact class, so transport is straightforward on a small trailer and the machine can work in confined spaces. The wheeled undercarriage gives stability on firm, level ground, and the relatively low travel speed range is intended for site movement rather than long highway runs. Plan lifting and attachment changes around the machine's footprint, and keep ground conditions firm when working at full reach with the 3500 mm dig depth. Inspection should cover the wheeled undercarriage, steering and braking, then the boom, dipper and bucket linkage for wear.

Check the YC4FA65 engine for leaks, belt condition and cooling, and confirm the hydraulic system holds pressure without drift. Test travel speeds through the 19 to 21 km/h range and listen for transmission noise. Verify the digging depth against the 3500 mm figure on a measured trench, and inspect the operator station and safety decals. Shipping preparation includes cleaning the machine, securing the boom and attachments, and confirming tie-down points on the chassis.

Drain or protect fluids for the voyage, and check that the wheeled undercarriage is locked for transport. Provide lifting points and a transport weight consistent with the compact class, and document the dimensions for the carrier. Confirm the YC4FA65 engine and hydraulic components are protected from salt air, and label controls for the receiving operator.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Hunter (Hengte) HTL70 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Hunter (Hengte) HTL70 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Hunter (Hengte) HTL70 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.