Hunter (Hengte) HTL65-8

Used Hunter (Hengte) HTL65-8 wheeled excavator — reference specifications, condition points and export notes for this model.

The Hunter (Hengte) HTL65-8 is a compact wheeled digging excavator with a 0.23m3 bucket. Its YC4F70Z-T21 engine delivers 50kW at 2200rpm and travel speed is 18km/h. It suits light trenching, utility work and small-site excavation where a compact wheeled machine is needed.

Description is a class-level reference built from the published specifications above; the exact unit's year, hours and condition are confirmed before payment.

Reference specifications

Reference specifications for Hunter (Hengte) HTL65-8
Bucket capacity	0.23 (m3)
Rated power	50/2200 (kw/rpm)
Engine	YC4F70Z-T21
Travel speed	18 (km/h)

Values are a public reference for this model. Confirm the exact unit's year, hours, condition and attachments before purchase.

Buying brief: Hunter (Hengte) HTL65-8

Hunter HTL65-8 has a 0.23 m3 bucket and 50 kW at 2200 rpm, powered by a YC4F70Z-T21 engine. It is a compact wheeled excavator suited to utility work, landscaping, trenching and small site preparation. Travel speed of 18 km/h is lower than some road-capable models, so it is better for moving around a single site or short distances. The engine and hydraulic system are sized for steady digging in moderate soils. This model fits contractors needing a simple, compact machine for repetitive tasks. The wheeled undercarriage on the HTL65-8 behaves well on firm, level ground, with steering and drive similar to a small truck.

The lower travel speed of 18 km/h means it is not intended for long road trips; plan to trailer it between distant sites. On soft or uneven ground, traction is limited, so use stabilisers when digging. The compact size allows access to tight areas. Keep tyres properly inflated and avoid sharp turns on delicate surfaces. Inspect the HTL65-8 before purchase by checking tyre condition, wheel bearings, steering and brakes. Look at boom and arm pins for wear, hydraulic hoses for damage, and the swing bearing for play.

Start the YC4F70Z-T21 engine cold and listen for abnormal noise or smoke. Operate all hydraulic functions through full cycles and check for leaks at the pump, valves and cylinders. Test travel in both directions. Confirm the serial plate matches the documents and check for any structural cracks. Shipping the HTL65-8 is straightforward by flatbed truck or in a container after removing the boom if required. Its compact size and moderate weight keep transport simple.

Secure with chains at the tie-down points, lower the boom, and set the parking brake. For container loading, follow the carrier's lashing instructions and block the wheels. Confirm overall dimensions and weight with the seller before booking freight.

A class-level brief: it describes this size of machine and what to check. It is not a statement of availability or price for any specific unit.

Ask about this model↗Export & shipping

Common questions

Is a used Hunter (Hengte) HTL65-8 available right now?

Availability changes with stock. Send us the model and destination and we confirm the units currently on hand or that can be sourced.

What does a used Hunter (Hengte) HTL65-8 cost?

Price depends on year, working hours, condition, attachments and destination. We quote per unit, FOB China or CIF your port, after confirming the exact machine.

How is a Hunter (Hengte) HTL65-8 shipped from China?

Usually by container, flat rack, RoRo or breakbulk, chosen by the unit's real dimensions and your destination port. We plan loading before the balance payment.